Edgarcn 5C908 fuse automotive wire harness
| Specification | ||||||
| Part number | Cable 5C908 | |||||
| Wire length | 30cm | |||||
| Wire AWG | UL1007-22AWG | |||||
| Color | Black & Red | |||||
| Other | with 2 fuses | |||||
| Application | Auto | |||||
Molex micro-fit 20 Pin out
Pin Number | Signal description | Color | Pin Number | Signal description | Color |
1 | Ground | Black | 11 | Output 2 | White/Yellow |
2 | Output 0 | Green | 12 | Input 2 | Brown |
3 | Input 1 | Yellow | 13 | Host RXD | Green |
4 | Host TxD | Blue | 14 | Primary VCC input | White/Red |
5 | ADC1 Input | Orange | 15 | Primary Ground | Black |
6 | Reserved | Red | 16 | 1 Bit Bus GND | Black |
7 | Reserved | White | 17 | 1 Bit Bus Data | White/Blue |
8 | Ignition | Violet | 18 | Aux Port - TX data | White/Orange |
9 | V00 | Orange | 19 | Aux Port - GND | Black |
10 | Output 1 /Boot | Blue | 20 | Aux Port - Rx data | White/Yellow |
Packaging Details could be customized by client specified.
Normally, the lead time below for reference, the detail according to conversation:
| Quantity (PCS) | 1 - 1000 | 1001 - 5000 | >5000 | Mold/ tooling |
| Est. Time(Days) | 20 | 25 | To be negotiated | 30 days more |
International expressed by DHL, UPS, FedEx, TNT, ARAMEX and EMS etc..
Customers choice for shipping by air, sea or others.
Payment for samples/mass products shall be closing before delivery, amount above 5000 USD according to conversation in somewhere.
Molex/Tyco/JST standard connector wire harness, USB data cable, Modular RJ 45 Cat cable,
Power DC cable, D-sub data cable, Mini Din, RCA cable and IDC flat ribbon cable etc.
1. Q: Can you help to design?
A: Yes, we are an ODM / OEM company, beyond we have been specializing in wire harness & Cable assembly since 1999.
2. Q: When will you start to help design?
A: We sketch simple solution for initial discussion, after quotation and order placed then start to drawing and double confirm with client for the design.
3. Q: What if quality issues occur when customer discover?
A: Our quality and engineer team will positively respond for the quality issues with 72 hours, as we are intend to make long-stand strategy with customer and the value is to provide better service.
4. Q: Do you have any standard products to cut down customers lead time for prototype and tooling cost?
A: Yes, we have developed over 1000 sets of molds and some of them can be used for customer directly. Besides, we specialize in wire harness over 20 years with more than 5000 products